East Africa

Underwater Diving Services in Kenya

Ports served: Mombasa, Lamu.

Ports
2
Services
8
Typical response
3–4 days for planned work
Mobilised from
Douala, Cameroon

Overview

Working in Kenya

Mombasa is the gateway port for Kenya, Uganda, Rwanda, South Sudan and eastern DR Congo, and the busiest port on the East African coast after Durban. Kilindini harbour handles containers on the Asia–East Africa and Europe loops, bulk grain, clinker and fertiliser, product tankers at the Kipevu oil terminal, cruise calls and the Indian Ocean fishing fleet. Lamu, further north, is the first berth of the LAPSSET corridor port — deep, new and lightly used, with transhipment ambitions.

Kilindini is a deep, sheltered creek harbour with warm, moderately clear Indian Ocean water and a strong tidal stream through the entrance; in-water work is planned for slack water and the container berths give the best conditions. Long bulk and tanker stays and regular container calls make Mombasa a practical port for hull cleaning, propeller polishing and an intermediate in-water survey. In-water work permits come from the Kenya Ports Authority through the vessel's agent and take two to three working days.

Teams fly Douala–Nairobi–Mombasa (Kenya Airways connects both) with the dive spread; planned work is on site in three to four days. Bureau Veritas, DNV, ABS and Lloyd's Register all have surveyors in Mombasa.

Ports

Ports we serve in Kenya

Where our dive teams work, the vessel types that call there, and what we deliver at each berth or anchorage.

Mombasa

Seaport

UN/LOCODE KEMBA

East Africa's gateway port in the sheltered Kilindini creek: container terminals, bulk and general-cargo berths, the Kipevu oil terminal, cruise berth and fishing harbour. Warm, moderately clear water with a strong tidal stream — work is timed for slack water, container berths give the best conditions. KPA permit through the agent, two to three working days; surveyors from all four major societies in the city.

Vessel types
container, general cargo, ro-ro, dry bulk, tanker, product tanker, cruise ship, passenger ferry
Services
8 services available at this port

Lamu

Seaport

UN/LOCODE KELAU

The LAPSSET corridor's new deep-water port north of Mombasa, with three container berths (17.5 m) and little congestion. Clear water and long berth availability make it a quiet place for a full hull clean or in-water survey on vessels routed there; reached by road or air from Mombasa.

Vessel types
container, general cargo, ro-ro, dry bulk
Services
8 services available at this port

Services

Underwater services in Kenya

Every service below is available at Mombasa, Lamu and the other ports listed above. Each links to its full technical page.

Underwater Maintenance in Kenya

Underwater Maintenance — full page

Hull Cleaning and Marine Growth Removal in Kenya

Done at the Kilindini container berths during the call or on bulk carriers during long discharges, timed for slack water, with CCTV before/after documentation.

In-water hull cleaning at berth or anchorage with brush-cart systems matched to the coating, removing slime, weed and hard fouling without damaging the antifouling. A heavily fouled hull typically recovers measurable speed and 5–10% fuel, and before/after CCTV footage is supplied to the superintendent.

  • Hull cleaning and marine growth removal
  • Intake and discharge grating cleaning
  • Underwater painting and anti-fouling application
  • Before/after CCTV video and fouling report

Mombasa, Lamu

Propeller Polishing and Maintenance in Kenya

Propeller polishing in the water to Rupert grade A/B with pneumatic or hydraulic polishing discs, restoring blade surface finish and removing calcareous growth and pitting. Carried out during cargo operations, with a polishing-grade report and photographs on completion.

  • Propeller polishing and maintenance
  • Rupert scale grading before and after
  • Fixed-pitch and controllable-pitch propellers, thrusters
  • Photo report with blade-by-blade condition notes

Mombasa, Lamu

Cathodic Protection (Anode) Replacement in Kenya

Survey and replacement of sacrificial anodes on hull, rudder, sea chests and thruster tunnels, welded or bolted, with hull potential readings to confirm the cathodic protection system is performing.

  • Cathodic protection (anode) replacement
  • Anode condition survey with wastage percentages
  • Hull potential readings (CP survey)
  • ICCP anode and reference cell inspection

Mombasa, Lamu

Sea Chest and Sea Valve Cleaning in Kenya

Clearing of sea-chest gratings and inlets to restore cooling-water flow, including grating removal and refitting, internal cleaning, and blanking of sea chests so valves can be overhauled on board without docking.

  • Sea chest and sea valve cleaning
  • Blank-off for sea chest suctions and discharges
  • Grating removal, cleaning and refitting
  • Combined with hull cleaning on the same call

Mombasa, Lamu

Underwater Repair in Kenya

Underwater Repair — full page

Hull, Propeller and Rudder Repairs in Kenya

Afloat repairs that avoid an unplanned dry-docking: hull plate repairs and patching, propeller blade straightening and cropping, rudder and stern-tube seal work under habitat, thruster repairs, sea valve and sea chest repairs, and emergency leak sealing and damage control.

  • Hull plate repairs and patching
  • Propeller blade straightening and repair
  • Rudder and stern tube seal repairs
  • Thruster repair and emergency leak sealing

Mombasa, Lamu

Underwater Welding and Cutting in Kenya

Wet welding to Lloyd's Register-approved procedures for hull crack repair, doubler plates, cofferdams and structural attachments, plus oxy-arc and hydraulic cutting for fouled propellers, damaged appendages and steel preparation. Welder-diver qualifications are available to class and owners' surveyors before work starts.

  • Underwater welding and cutting
  • Lloyd's Register-approved wet-welding procedures
  • Flat, vertical and overhead positions
  • Rope, net and cable clearance from propellers

Mombasa, Lamu

Underwater Inspection in Kenya

Underwater Inspection — full page

Class-Approved In-Water Survey (UWILD) in Kenya

Mombasa has surveyors from all four major societies and moderately clear water; the survey is run at slack water with lights at the container or bulk berths.

In-water survey in lieu of dry-docking with the class surveyor attending on site or remotely over live CCTV: hull plating, sea chests, rudder and propeller, stern-tube seals and clearances. Procedures accepted by Bureau Veritas, ABS, DNV and Lloyd's Register; the report is delivered in the society's required format.

  • Class-approved in-water surveys
  • Live CCTV feed for the attending surveyor
  • Rudder pintle and stern-tube wear-down measurements
  • Report in class-society format within 24 hours

Mombasa, Lamu

Hull Condition Surveys, NDT and Video Documentation in Kenya

Damage inspections after contact in the Kilindini entrance and pre-charter inspections on the fishing and tanker fleets, with a same-day preliminary report.

Hull condition surveys and damage assessment, propeller and rudder inspections, cathodic protection and sea chest inspections, thickness measurement and NDT, and pre-purchase or pre-charter hull inspections — all with underwater video and photographic documentation and a same-day preliminary report.

  • Hull condition surveys and damage assessment
  • Thickness measurement and NDT testing
  • Underwater video and photographic documentation
  • Pre-purchase and pre-charter hull inspections

Mombasa, Lamu

Ship agency services at Kenya ports

How our ship agency works

We also act as ship agent at Mombasa, Lamu. Our own team handles the call wherever we can; where we can't, a vetted local agent does the work under our supervision and we remain your single point of contact.

  • Full Port Agency Services
  • Husbandry Services
  • Ship Chandling & Supply
  • Ship's Protecting Agent
  • Stowaway Dog Search & Guarding Services
  • Vessel Welding Services
  • Waste Removal & Management
  • Tank & Vessel Cleaning
  • Stevedore Agency Services
  • Crew Change Handling
  • Ship's Spares Handling
  • Cross Stuffing Services
Request ship agency in Kenya

Mobilisation

Mobilisation and response

Mobilised from

Our Douala base, Cameroon — divers, supervisors and equipment travel as one team.

Typical response

3–4 days for planned work

Class societies attended

Bureau Veritas, ABS, DNV, Lloyd's Register

Douala–Nairobi–Mombasa by air with the dive spread as accompanied freight. KPA in-water permits via the agent take two to three working days.

FAQ

Questions operators ask about Kenya

Need a dive team in Kenya?

Send the vessel name, port (Mombasa, Lamu) and ETA. Cameroon Diving Services replies with a scope and quote, usually within a few hours, 24/7.