Central Africa

Underwater Diving Services in Cameroon

Ports served: Kribi, Limbe, Douala.

Ports
3
Services
11
Typical response
Same day at Kribi, Limbe and Douala
Mobilised from
Douala, Cameroon

Overview

Working in Cameroon

Cameroon is our home market. Most of our work is at Kribi and Limbe — the deep-water port and the refinery and shipyard coast — with Douala, the country's main commercial port and our head office, making up the rest. Because divers, supervisors and equipment are already in the country, a hull cleaning, propeller polish or UWILD at any of the three ports is a same-day or next-day job rather than a mobilisation. Since 2014 the company has grown from hull cleaning into a full underwater contractor: class in-water surveys, Lloyd's Register-approved wet welding, propeller and stern-gear work, subsea support for the offshore terminals off Kribi and Limbe, and ship agency and husbandry for vessels calling at Cameroon ports.

Operators should know three things about working here. Kribi is a deep-water port (16 m alongside) with clean water and good visibility, which makes it the best location in the country for class surveys and CCTV work, and the natural place to schedule a UWILD. Limbe has the SONARA refinery, an offshore SBM and the CNIC shipyard, so the work there is more often tanker, terminal and repair support than container-vessel maintenance. Douala is a river port on the Wouri estuary with a tidal, dredged access channel, so in-water work is planned around the tide and the vessel's berth time — we do it alongside cargo operations.

Our UWILD procedures are accepted by Bureau Veritas, ABS, DNV and Lloyd's Register. Port permits for in-water work are obtained through the Port Autonome de Kribi or the Port Autonome de Douala; we handle the paperwork as part of the job.

Ports

Ports we serve in Cameroon

Where our dive teams work, the vessel types that call there, and what we deliver at each berth or anchorage.

Kribi

Seaport

UN/LOCODE CMKBI

Deep-water port 150 km south of Douala, open since 2018, with 16 m alongside at the container and multipurpose terminals. Clean water and good visibility make Kribi the preferred site in Cameroon for class in-water surveys and CCTV documentation. Offshore lie the Kome-Kribi 1 FSO of the Chad–Cameroon pipeline and the Hilli Episeyo FLNG; Kribi is where most of our Cameroon work takes place, for the terminal operators as much as for the container, LNG and tanker traffic calling there.

Vessel types
container, dry bulk, general cargo, LNG carrier, tanker, offshore supply, FPSO / FSO
Services
11 services available at this port

Limbe

Seaport

UN/LOCODE CMLMB

Limbe combines the SONARA refinery with its offshore SBM at Limboh Point, the CNIC shipyard and floating dock, and a small commercial port. Work here is mostly tanker and terminal support — SBM hose and hawser inspection, hull and sea-chest work on product tankers waiting for the buoy — and diving support for vessels at the yard. With Kribi, Limbe is where most of our Cameroon work is done; a team is on site the same day.

Vessel types
tanker, product tanker, offshore supply, AHTS, general cargo
Services
10 services available at this port

Douala

River port

UN/LOCODE CMDLA

Cameroon's main port, about 25 nautical miles up the Wouri estuary from the pilot station. The channel is dredged to roughly 7–8.5 m and tidal, so vessels arrive on the tide and berth time is precious; we work alongside during cargo operations and finish before sailing. Visibility is low in the estuary, so all hull cleaning, propeller polishing and inspection is documented on CCTV with lights. Our head office is in the city: a team is on the quay within hours of the call.

Vessel types
container, general cargo, ro-ro, dry bulk, tanker, product tanker, offshore supply
Services
10 services available at this port

Services

Underwater services in Cameroon

Every service below is available at Kribi, Limbe, Douala and the other ports listed above. Each links to its full technical page.

Underwater Maintenance in Cameroon

Underwater Maintenance — full page

Hull Cleaning and Marine Growth Removal in Cameroon

Most of our hull cleaning in Cameroon is done at Kribi and Limbe, where the clearer water allows full CCTV documentation of the cleaned hull. At Douala it is planned around the tide and done during cargo operations so the vessel sails on schedule.

In-water hull cleaning at berth or anchorage with brush-cart systems matched to the coating, removing slime, weed and hard fouling without damaging the antifouling. A heavily fouled hull typically recovers measurable speed and 5–10% fuel, and before/after CCTV footage is supplied to the superintendent.

  • Hull cleaning and marine growth removal
  • Intake and discharge grating cleaning
  • Underwater painting and anti-fouling application
  • Before/after CCTV video and fouling report

Kribi, Limbe, Douala

Propeller Polishing and Maintenance in Cameroon

Polishing is routinely combined with a hull clean on the same call at Kribi, Limbe or Douala. Container vessels on the West Africa loops typically book it every second or third call.

Propeller polishing in the water to Rupert grade A/B with pneumatic or hydraulic polishing discs, restoring blade surface finish and removing calcareous growth and pitting. Carried out during cargo operations, with a polishing-grade report and photographs on completion.

  • Propeller polishing and maintenance
  • Rupert scale grading before and after
  • Fixed-pitch and controllable-pitch propellers, thrusters
  • Photo report with blade-by-blade condition notes

Kribi, Limbe, Douala

Cathodic Protection (Anode) Replacement in Cameroon

Survey and replacement of sacrificial anodes on hull, rudder, sea chests and thruster tunnels, welded or bolted, with hull potential readings to confirm the cathodic protection system is performing.

  • Cathodic protection (anode) replacement
  • Anode condition survey with wastage percentages
  • Hull potential readings (CP survey)
  • ICCP anode and reference cell inspection

Kribi, Limbe, Douala

Sea Chest and Sea Valve Cleaning in Cameroon

The Wouri estuary's silt and growth block sea-chest gratings quickly; grating cleaning is often the first call we get from a vessel with rising cooling-water temperatures at Douala.

Clearing of sea-chest gratings and inlets to restore cooling-water flow, including grating removal and refitting, internal cleaning, and blanking of sea chests so valves can be overhauled on board without docking.

  • Sea chest and sea valve cleaning
  • Blank-off for sea chest suctions and discharges
  • Grating removal, cleaning and refitting
  • Combined with hull cleaning on the same call

Kribi, Limbe, Douala

Underwater Repair in Cameroon

Underwater Repair — full page

Underwater Welding and Cutting in Cameroon

Lloyd's Register-approved wet welding: crack arrest and doublers on shell plating, cofferdams for valve work, and repairs alongside the CNIC yard in Limbe.

Wet welding to Lloyd's Register-approved procedures for hull crack repair, doubler plates, cofferdams and structural attachments, plus oxy-arc and hydraulic cutting for fouled propellers, damaged appendages and steel preparation. Welder-diver qualifications are available to class and owners' surveyors before work starts.

  • Underwater welding and cutting
  • Lloyd's Register-approved wet-welding procedures
  • Flat, vertical and overhead positions
  • Rope, net and cable clearance from propellers

Kribi, Limbe, Douala

Hull, Propeller and Rudder Repairs in Cameroon

Propeller cropping and balancing, rope-guard and rope-cutter replacement and stern-seal work under habitat at Kribi, Limbe or Douala, avoiding a diversion to a dry dock outside the region.

Afloat repairs that avoid an unplanned dry-docking: hull plate repairs and patching, propeller blade straightening and cropping, rudder and stern-tube seal work under habitat, thruster repairs, sea valve and sea chest repairs, and emergency leak sealing and damage control.

  • Hull plate repairs and patching
  • Propeller blade straightening and repair
  • Rudder and stern tube seal repairs
  • Thruster repair and emergency leak sealing

Kribi, Limbe, Douala

Underwater Inspection in Cameroon

Underwater Inspection — full page

Class-Approved In-Water Survey (UWILD) in Cameroon

Our UWILD procedures are accepted by Bureau Veritas, ABS, DNV and Lloyd's Register. Kribi is recommended for surveys where the class requires good-visibility footage; at Douala the survey is timed for slack water.

In-water survey in lieu of dry-docking with the class surveyor attending on site or remotely over live CCTV: hull plating, sea chests, rudder and propeller, stern-tube seals and clearances. Procedures accepted by Bureau Veritas, ABS, DNV and Lloyd's Register; the report is delivered in the society's required format.

  • Class-approved in-water surveys
  • Live CCTV feed for the attending surveyor
  • Rudder pintle and stern-tube wear-down measurements
  • Report in class-society format within 24 hours

Kribi, Limbe, Douala

Hull Condition Surveys, NDT and Video Documentation in Cameroon

Condition inspections for charterers and P&I clubs, and damage inspections after channel groundings or berth contact at Douala, with a same-day preliminary report.

Hull condition surveys and damage assessment, propeller and rudder inspections, cathodic protection and sea chest inspections, thickness measurement and NDT, and pre-purchase or pre-charter hull inspections — all with underwater video and photographic documentation and a same-day preliminary report.

  • Hull condition surveys and damage assessment
  • Thickness measurement and NDT testing
  • Underwater video and photographic documentation
  • Pre-purchase and pre-charter hull inspections

Kribi, Limbe, Douala

Oil and Gas in Cameroon

Oil and Gas — full page

Oil and Gas Underwater Services in Cameroon

SBM, hose and hawser inspection at the Limbe and Kribi terminals, and FSO/FLNG hull and sea-chest support offshore Kribi.

Air-diving support for offshore and terminal operators: single point mooring (SPM) services, pipeline and cable tasks, rig support diving, construction and installation tasks, and FPSO/FSO hull and sea-chest work, under the operator's HSE and permit-to-work system.

  • Single point mooring (SPM) services
  • Pipelines and cables tasks
  • Rig support diving
  • Construction and installation tasks

Kribi, Limbe

Special Services in Cameroon

Special Services — full page

Salvage, Search and Recovery in Cameroon

Lost anchors and chain at the Kribi anchorage and in the Douala channel are a regular job; we search with sonar and recover with lift bags or the port's crane barge.

Salvage support and recovery of lost anchors and chain, dropped cargo and equipment, and small craft, using sonar, magnetometer and diver search patterns, with lift-bag or crane recovery.

  • Salvage operations
  • Lost anchor and chain recovery
  • Sonar and magnetometer search
  • Lift-bag and crane recovery

Kribi, Limbe, Douala

Industry Services in Cameroon

Industry Services — full page

Marine Infrastructure and Civil Engineering Diving in Cameroon

Quay wall, fender and pile inspection for the Kribi and Douala port authorities and terminal operators, and diving support for marine construction.

Inspection and maintenance diving for marine infrastructure and marine civil engineering constructions: quay wall and pile inspection, fender and bollard foundations, intake structures and outfalls, dam and reservoir works, and diving support for marine construction.

  • Marine civil engineer constructions
  • Quay, jetty and pile condition surveys
  • Intake, outfall and dam structure inspection
  • Reporting for port authorities and engineers

Kribi, Douala

Mobilisation

Mobilisation and response

Mobilised from

Our Douala base, Cameroon — divers, supervisors and equipment travel as one team.

Typical response

Same day at Kribi, Limbe and Douala

Class societies attended

Bureau Veritas, ABS, DNV, Lloyd's Register

Head office is in Douala; dive teams and equipment are in the country year-round, with most work at Kribi and Limbe. Port permits for in-water work are arranged with the Port Autonome de Kribi or Douala as part of the job. We also act as port agent in Cameroon, so vessel clearance, crew and spares can be handled by the same team.

FAQ

Questions operators ask about Cameroon

Need a dive team in Cameroon?

Send the vessel name, port (Kribi, Limbe, Douala) and ETA. Cameroon Diving Services replies with a scope and quote, usually within a few hours, 24/7.