Central Africa

Underwater Diving Services in Democratic Republic of the Congo

Ports served: Matadi, Boma, Banana.

Ports
3
Services
6
Typical response
2–3 days for planned work
Mobilised from
Douala, Cameroon

Overview

Working in Democratic Republic of the Congo

The Democratic Republic of the Congo reaches the sea through a 40 km strip on the Congo River estuary, and its three ports are river ports. Matadi, 150 km upriver at the limit of navigation, is the main port for the capital's containers, general cargo and fuel, with the Matadi Gateway Terminal handling the container traffic on the Europe and Asia loops; Boma, downstream, is the older general-cargo and timber port; Banana at the river mouth is the oil terminal and the site of the new deep-water port under construction. Kinshasa's inland river traffic is served from Matadi by road.

The Congo is one of the strongest-flowing rivers in the world: currents at Matadi run at several knots and the water is heavily turbid. In-water work is done alongside only, timed for the weakest current, with lights and continuous CCTV, and it is a job for experienced river divers — which is why operators calling Matadi come to us. Container vessels on the loops get hull inspection, propeller clearance and polishing, sea-chest and anode work; full hull cleaning is possible at Banana or Boma where the current is gentler. Permits come from the Société Commerciale des Transports et des Ports (SCTP) and the terminal operator through the vessel's agent and take two to three working days.

Teams travel from Douala by air to Kinshasa and by road to Matadi, or via Pointe-Noire for Banana; planned work is on site in two to three days. Bureau Veritas attends the Congolese ports; other societies by arrangement or remotely.

Ports

Ports we serve in Democratic Republic of the Congo

Where our dive teams work, the vessel types that call there, and what we deliver at each berth or anchorage.

Matadi

River port

UN/LOCODE CDMAT

DR Congo's main port, 150 km up the Congo River at the limit of navigation: Matadi Gateway Terminal container berths, SCTP general-cargo and fuel quays. Very strong current and heavily turbid water — alongside work only, at the weakest current, with lights and continuous CCTV, by experienced river divers. SCTP and terminal permit through the agent; reached by road from Kinshasa.

Vessel types
container, general cargo, ro-ro, dry bulk
Services
6 services available at this port

Boma

River port

UN/LOCODE CDBOA

The older general-cargo and timber port downstream of Matadi, with gentler current and a sheltered quay. Better conditions than Matadi for hull cleaning and propeller polishing on vessels that can call there.

Vessel types
general cargo, dry bulk
Services
6 services available at this port

Banana

Seaport

UN/LOCODE CDBNW

Oil terminal and naval base at the river mouth, and the site of the new deep-water container port under construction. Tankers at the terminal and supply vessels for the offshore blocks; the estuary is calmer and less turbid than the river ports. Reached via Pointe-Noire or by road from Boma.

Vessel types
tanker, product tanker, offshore supply, AHTS, FPSO / FSO
Services
6 services available at this port

Services

Underwater services in Democratic Republic of the Congo

Every service below is available at Matadi, Boma, Banana and the other ports listed above. Each links to its full technical page.

Underwater Maintenance in Democratic Republic of the Congo

Underwater Maintenance — full page

Hull Cleaning and Marine Growth Removal in Democratic Republic of the Congo

Spot cleaning and sea-chest work at Matadi; full hull cleaning at Boma or Banana where the current allows, with CCTV documentation.

In-water hull cleaning at berth or anchorage with brush-cart systems matched to the coating, removing slime, weed and hard fouling without damaging the antifouling. A heavily fouled hull typically recovers measurable speed and 5–10% fuel, and before/after CCTV footage is supplied to the superintendent.

  • Hull cleaning and marine growth removal
  • Intake and discharge grating cleaning
  • Underwater painting and anti-fouling application
  • Before/after CCTV video and fouling report

Matadi, Boma, Banana

Propeller Polishing and Maintenance in Democratic Republic of the Congo

Propeller clearance and polishing at Matadi during the container call, timed for the weakest current; full polishing in easier conditions at Boma or Banana.

Propeller polishing in the water to Rupert grade A/B with pneumatic or hydraulic polishing discs, restoring blade surface finish and removing calcareous growth and pitting. Carried out during cargo operations, with a polishing-grade report and photographs on completion.

  • Propeller polishing and maintenance
  • Rupert scale grading before and after
  • Fixed-pitch and controllable-pitch propellers, thrusters
  • Photo report with blade-by-blade condition notes

Matadi, Boma, Banana

Cathodic Protection (Anode) Replacement in Democratic Republic of the Congo

Survey and replacement of sacrificial anodes on hull, rudder, sea chests and thruster tunnels, welded or bolted, with hull potential readings to confirm the cathodic protection system is performing.

  • Cathodic protection (anode) replacement
  • Anode condition survey with wastage percentages
  • Hull potential readings (CP survey)
  • ICCP anode and reference cell inspection

Matadi, Boma, Banana

Underwater Repair in Democratic Republic of the Congo

Underwater Repair — full page

Hull, Propeller and Rudder Repairs in Democratic Republic of the Congo

Afloat repairs that avoid an unplanned dry-docking: hull plate repairs and patching, propeller blade straightening and cropping, rudder and stern-tube seal work under habitat, thruster repairs, sea valve and sea chest repairs, and emergency leak sealing and damage control.

  • Hull plate repairs and patching
  • Propeller blade straightening and repair
  • Rudder and stern tube seal repairs
  • Thruster repair and emergency leak sealing

Matadi, Boma, Banana

Underwater Inspection in Democratic Republic of the Congo

Underwater Inspection — full page

Class-Approved In-Water Survey (UWILD) in Democratic Republic of the Congo

In-water survey in lieu of dry-docking with the class surveyor attending on site or remotely over live CCTV: hull plating, sea chests, rudder and propeller, stern-tube seals and clearances. Procedures accepted by Bureau Veritas, ABS, DNV and Lloyd's Register; the report is delivered in the society's required format.

  • Class-approved in-water surveys
  • Live CCTV feed for the attending surveyor
  • Rudder pintle and stern-tube wear-down measurements
  • Report in class-society format within 24 hours

Matadi, Boma, Banana

Hull Condition Surveys, NDT and Video Documentation in Democratic Republic of the Congo

Hull, propeller and rudder inspections on container vessels at Matadi are the core of our DR Congo work — done alongside at the weakest current with continuous CCTV, and a preliminary report the same day.

Hull condition surveys and damage assessment, propeller and rudder inspections, cathodic protection and sea chest inspections, thickness measurement and NDT, and pre-purchase or pre-charter hull inspections — all with underwater video and photographic documentation and a same-day preliminary report.

  • Hull condition surveys and damage assessment
  • Thickness measurement and NDT testing
  • Underwater video and photographic documentation
  • Pre-purchase and pre-charter hull inspections

Matadi, Boma, Banana

Ship agency services at Democratic Republic of the Congo ports

How our ship agency works

We also act as ship agent at Matadi, Boma, Banana. Our own team handles the call wherever we can; where we can't, a vetted local agent does the work under our supervision and we remain your single point of contact.

  • Full Port Agency Services
  • Husbandry Services
  • Ship Chandling & Supply
  • Ship's Protecting Agent
  • Stowaway Dog Search & Guarding Services
  • Vessel Welding Services
  • Waste Removal & Management
  • Tank & Vessel Cleaning
  • Stevedore Agency Services
  • Crew Change Handling
  • Ship's Spares Handling
  • Cross Stuffing Services
Request ship agency in Democratic Republic of the Congo

Mobilisation

Mobilisation and response

Mobilised from

Our Douala base, Cameroon — divers, supervisors and equipment travel as one team.

Typical response

2–3 days for planned work

Class societies attended

Bureau Veritas, ABS, DNV, Lloyd's Register

Douala–Kinshasa by air then road to Matadi (about five hours), or via Pointe-Noire for Banana, with the dive spread as accompanied freight. SCTP and terminal permits via the agent take two to three working days. Matadi work is scheduled against the river current forecast.

FAQ

Questions operators ask about Democratic Republic of the Congo

Need a dive team in Democratic Republic of the Congo?

Send the vessel name, port (Matadi, Boma, Banana) and ETA. Cameroon Diving Services replies with a scope and quote, usually within a few hours, 24/7.