West Africa

Underwater Diving Services in Guinea-Bissau

Ports served: Bissau (Porto Pidjiguiti).

Ports
1
Services
5
Typical response
3–4 days for planned work
Mobilised from
Douala, Cameroon

Overview

Working in Guinea-Bissau

Bissau's Porto Pidjiguiti is Guinea-Bissau's only commercial port, on the wide Geba River estuary: container feeders from Dakar, cashew exports — the country's main trade — general cargo and fuel, plus a fishing fleet working the rich offshore grounds. The port is small and often congested during the cashew season, and vessels wait at the estuary anchorage.

The estuary is tidal with strong streams and turbid water; in-water work alongside is timed for slack water and done with lights, and the anchorage is workable for propeller jobs and inspections. Feeder and cashew-season calls give time for hull cleaning and propeller polishing. Permits come from the port administration (APGB) through the vessel's agent and take two to three working days.

Teams fly Douala–Bissau via Dakar or Lisbon with the dive spread; planned work is on site in three to four days. Bureau Veritas attends from Dakar; other societies by arrangement or remotely over the live video link.

Ports

Ports we serve in Guinea-Bissau

Where our dive teams work, the vessel types that call there, and what we deliver at each berth or anchorage.

Bissau (Porto Pidjiguiti)

River port

UN/LOCODE GWBXO

Guinea-Bissau's only commercial port on the Geba estuary: feeder and general-cargo quays, cashew exports, fuel and a fishing harbour, with an estuary anchorage used during the cashew-season congestion. Tidal, turbid water — alongside work at slack water with lights; anchorage workable for propellers and inspections. APGB permit through the agent, two to three working days.

Vessel types
general cargo, dry bulk, fishing vessel, reefer
Services
5 services available at this port

Services

Underwater services in Guinea-Bissau

Every service below is available at Bissau (Porto Pidjiguiti) and the other ports listed above. Each links to its full technical page.

Underwater Maintenance in Guinea-Bissau

Underwater Maintenance — full page

Hull Cleaning and Marine Growth Removal in Guinea-Bissau

Alongside during feeder and cashew-season calls at slack water with lights and CCTV documentation.

In-water hull cleaning at berth or anchorage with brush-cart systems matched to the coating, removing slime, weed and hard fouling without damaging the antifouling. A heavily fouled hull typically recovers measurable speed and 5–10% fuel, and before/after CCTV footage is supplied to the superintendent.

  • Hull cleaning and marine growth removal
  • Intake and discharge grating cleaning
  • Underwater painting and anti-fouling application
  • Before/after CCTV video and fouling report

Bissau (Porto Pidjiguiti)

Propeller Polishing and Maintenance in Guinea-Bissau

Propeller polishing in the water to Rupert grade A/B with pneumatic or hydraulic polishing discs, restoring blade surface finish and removing calcareous growth and pitting. Carried out during cargo operations, with a polishing-grade report and photographs on completion.

  • Propeller polishing and maintenance
  • Rupert scale grading before and after
  • Fixed-pitch and controllable-pitch propellers, thrusters
  • Photo report with blade-by-blade condition notes

Bissau (Porto Pidjiguiti)

Cathodic Protection (Anode) Replacement in Guinea-Bissau

Survey and replacement of sacrificial anodes on hull, rudder, sea chests and thruster tunnels, welded or bolted, with hull potential readings to confirm the cathodic protection system is performing.

  • Cathodic protection (anode) replacement
  • Anode condition survey with wastage percentages
  • Hull potential readings (CP survey)
  • ICCP anode and reference cell inspection

Bissau (Porto Pidjiguiti)

Underwater Inspection in Guinea-Bissau

Underwater Inspection — full page

Class-Approved In-Water Survey (UWILD) in Guinea-Bissau

In-water survey in lieu of dry-docking with the class surveyor attending on site or remotely over live CCTV: hull plating, sea chests, rudder and propeller, stern-tube seals and clearances. Procedures accepted by Bureau Veritas, ABS, DNV and Lloyd's Register; the report is delivered in the society's required format.

  • Class-approved in-water surveys
  • Live CCTV feed for the attending surveyor
  • Rudder pintle and stern-tube wear-down measurements
  • Report in class-society format within 24 hours

Bissau (Porto Pidjiguiti)

Hull Condition Surveys, NDT and Video Documentation in Guinea-Bissau

Damage inspections after contact in the estuary and condition inspections on the fishing fleet, with a same-day preliminary report.

Hull condition surveys and damage assessment, propeller and rudder inspections, cathodic protection and sea chest inspections, thickness measurement and NDT, and pre-purchase or pre-charter hull inspections — all with underwater video and photographic documentation and a same-day preliminary report.

  • Hull condition surveys and damage assessment
  • Thickness measurement and NDT testing
  • Underwater video and photographic documentation
  • Pre-purchase and pre-charter hull inspections

Bissau (Porto Pidjiguiti)

Ship agency services at Guinea-Bissau ports

How our ship agency works

We also act as ship agent at Bissau (Porto Pidjiguiti). Our own team handles the call wherever we can; where we can't, a vetted local agent does the work under our supervision and we remain your single point of contact.

  • Full Port Agency Services
  • Husbandry Services
  • Ship Chandling & Supply
  • Ship's Protecting Agent
  • Stowaway Dog Search & Guarding Services
  • Vessel Welding Services
  • Waste Removal & Management
  • Tank & Vessel Cleaning
  • Stevedore Agency Services
  • Crew Change Handling
  • Ship's Spares Handling
  • Cross Stuffing Services
Request ship agency in Guinea-Bissau

Mobilisation

Mobilisation and response

Mobilised from

Our Douala base, Cameroon — divers, supervisors and equipment travel as one team.

Typical response

3–4 days for planned work

Class societies attended

Bureau Veritas, ABS, DNV, Lloyd's Register

Douala–Bissau via Dakar or Lisbon with the dive spread as accompanied freight. APGB permits via the agent take two to three working days.

FAQ

Questions operators ask about Guinea-Bissau

Need a dive team in Guinea-Bissau?

Send the vessel name, port (Bissau (Porto Pidjiguiti)) and ETA. Cameroon Diving Services replies with a scope and quote, usually within a few hours, 24/7.