West Africa

Underwater Diving Services in Togo

Ports served: Lomé.

Ports
1
Services
6
Typical response
2–3 days for planned work
Mobilised from
Douala, Cameroon

Overview

Working in Togo

Lomé is the only naturally deep port between Nigeria and Ghana and has become the main container transhipment hub for the Gulf of Guinea: the Lomé Container Terminal (LCT) and Togo Terminal take the largest vessels on the Asia–West Africa and Europe–West Africa loops, and feeders redistribute containers to the neighbouring ports. Behind the containers, the port handles the transit trade for Burkina Faso, Niger and Mali, dry bulk (clinker, wheat, fertiliser) and a product-tanker berth. It is also a well-used anchorage for vessels waiting for berths at Tema, Cotonou and Lagos.

For a superintendent that combination is useful: long berth stays on the large transhipment vessels give enough time for a full hull clean and propeller polish, and the anchorage gives a second option for propeller work and inspections on vessels waiting for the neighbouring ports. Water is warm and moderately clear — better than the Lagos lagoon — and the LCT berths are deep (16.6 m), so class in-water surveys are practical with lights at the calmer part of the day. In-water work permits come from the Port Autonome de Lomé through the vessel's agent and are normally issued within two working days.

Teams travel from Douala to Lomé by air (via Abidjan or Cotonou) with the dive spread; planned work is on site in two to three days. Bureau Veritas and DNV attend Lomé from their regional offices, and ABS and Lloyd's Register by arrangement.

Ports

Ports we serve in Togo

Where our dive teams work, the vessel types that call there, and what we deliver at each berth or anchorage.

Lomé

Seaport

UN/LOCODE TGLFW

West Africa's deepest transhipment port: LCT (16.6 m) and Togo Terminal container berths, dry-bulk and general-cargo quays, a product-tanker berth and a busy anchorage used by vessels waiting for Tema, Cotonou and Lagos. Large transhipment vessels give long berth windows for hull cleaning and propeller polishing; the anchorage suits propeller work and inspections on waiting vessels. Moderately clear water; class surveys with lights. Port Autonome permit through the agent, about two working days.

Vessel types
container, general cargo, ro-ro, dry bulk, tanker, product tanker
Services
6 services available at this port

Services

Underwater services in Togo

Every service below is available at Lomé and the other ports listed above. Each links to its full technical page.

Underwater Maintenance in Togo

Underwater Maintenance — full page

Hull Cleaning and Marine Growth Removal in Togo

The transhipment call at LCT or Togo Terminal is the natural slot: a full clean plus propeller polish inside the berth window, with CCTV before/after documentation.

In-water hull cleaning at berth or anchorage with brush-cart systems matched to the coating, removing slime, weed and hard fouling without damaging the antifouling. A heavily fouled hull typically recovers measurable speed and 5–10% fuel, and before/after CCTV footage is supplied to the superintendent.

  • Hull cleaning and marine growth removal
  • Intake and discharge grating cleaning
  • Underwater painting and anti-fouling application
  • Before/after CCTV video and fouling report

Lomé

Propeller Polishing and Maintenance in Togo

Done alongside during the container call or at the Lomé anchorage for vessels waiting on berths at Tema, Cotonou or Lagos — a productive use of waiting time.

Propeller polishing in the water to Rupert grade A/B with pneumatic or hydraulic polishing discs, restoring blade surface finish and removing calcareous growth and pitting. Carried out during cargo operations, with a polishing-grade report and photographs on completion.

  • Propeller polishing and maintenance
  • Rupert scale grading before and after
  • Fixed-pitch and controllable-pitch propellers, thrusters
  • Photo report with blade-by-blade condition notes

Lomé

Cathodic Protection (Anode) Replacement in Togo

Survey and replacement of sacrificial anodes on hull, rudder, sea chests and thruster tunnels, welded or bolted, with hull potential readings to confirm the cathodic protection system is performing.

  • Cathodic protection (anode) replacement
  • Anode condition survey with wastage percentages
  • Hull potential readings (CP survey)
  • ICCP anode and reference cell inspection

Lomé

Underwater Repair in Togo

Underwater Repair — full page

Hull, Propeller and Rudder Repairs in Togo

Afloat repairs that avoid an unplanned dry-docking: hull plate repairs and patching, propeller blade straightening and cropping, rudder and stern-tube seal work under habitat, thruster repairs, sea valve and sea chest repairs, and emergency leak sealing and damage control.

  • Hull plate repairs and patching
  • Propeller blade straightening and repair
  • Rudder and stern tube seal repairs
  • Thruster repair and emergency leak sealing

Lomé

Underwater Inspection in Togo

Underwater Inspection — full page

Class-Approved In-Water Survey (UWILD) in Togo

The deep LCT berths and moderately clear water make Lomé a practical port for an intermediate in-water survey on the large transhipment vessels; Bureau Veritas and DNV attend from their regional offices.

In-water survey in lieu of dry-docking with the class surveyor attending on site or remotely over live CCTV: hull plating, sea chests, rudder and propeller, stern-tube seals and clearances. Procedures accepted by Bureau Veritas, ABS, DNV and Lloyd's Register; the report is delivered in the society's required format.

  • Class-approved in-water surveys
  • Live CCTV feed for the attending surveyor
  • Rudder pintle and stern-tube wear-down measurements
  • Report in class-society format within 24 hours

Lomé

Hull Condition Surveys, NDT and Video Documentation in Togo

Hull condition surveys and damage assessment, propeller and rudder inspections, cathodic protection and sea chest inspections, thickness measurement and NDT, and pre-purchase or pre-charter hull inspections — all with underwater video and photographic documentation and a same-day preliminary report.

  • Hull condition surveys and damage assessment
  • Thickness measurement and NDT testing
  • Underwater video and photographic documentation
  • Pre-purchase and pre-charter hull inspections

Lomé

Ship agency services at Togo ports

How our ship agency works

We also act as ship agent at Lomé. Our own team handles the call wherever we can; where we can't, a vetted local agent does the work under our supervision and we remain your single point of contact.

  • Full Port Agency Services
  • Husbandry Services
  • Ship Chandling & Supply
  • Ship's Protecting Agent
  • Stowaway Dog Search & Guarding Services
  • Vessel Welding Services
  • Waste Removal & Management
  • Tank & Vessel Cleaning
  • Stevedore Agency Services
  • Crew Change Handling
  • Ship's Spares Handling
  • Cross Stuffing Services
Request ship agency in Togo

Mobilisation

Mobilisation and response

Mobilised from

Our Douala base, Cameroon — divers, supervisors and equipment travel as one team.

Typical response

2–3 days for planned work

Class societies attended

Bureau Veritas, ABS, DNV, Lloyd's Register

Douala–Lomé by air via Abidjan or Cotonou with the dive spread as accompanied freight. Port Autonome de Lomé permits via the agent take about two working days. Vessels waiting at the Lomé anchorage for other ports can be attended with the same permit.

FAQ

Questions operators ask about Togo

Need a dive team in Togo?

Send the vessel name, port (Lomé) and ETA. Cameroon Diving Services replies with a scope and quote, usually within a few hours, 24/7.